The premier choice for in-process and final test of computer cables as well as cabling of electrical appliances and wire harnesses. This easy-to-use system offers highly advanced capabilities and can be integrated into a PC network for central program management and storage of statistical test data.

• Test & Measurement Performance
• Maximum Voltage of 12.5 VDC
• Constant Current of 10 µA, 100 µA, 1 mA, or 5 mA
• Continuity/Insulation Thresholds from 10 Ohms to 100 kOhms
• Resistor Test from 1 Ohm to 1 MOhm (± 5% ± 5 Ohms)
• Capacitor Test from 50 nF to 1,000 µF (± 10% ± 20 nF)
• Diode Test for Open, Short and Reversed Insertion

• Switching Matrix
• Maximum of 1,024 Test Points via 8 x 128-Test Point Cards
• CMOS Analog Switching

• Functional Test (With Optional FT Box)
• Test of Keys and Switches, and Powered Devices such as Horns, Signals, Brake Lights, etc.
• Capable of Switching an External Source up to 24 VDC

• LED Drivers
• 128 LED Drivers Per Card
• Activates LEDs on an Assembly Board, Simultaneously with Associated Test Points
• Aids in Visual Wiring Assembly and Fault Location

• Hardware
• Stand-Alone Unit (No PC Required) via a Micro-Controller at 20 MHz
• 512 KB Static RAM Battery-Backed for 5 Years Minimum
• Optional Ethernet Interface for TCP/IP Transfer with Defined IP Address
• Two Parallel and Three Serial Interfaces (For Printer, Barcode Reader, etc.)
• Interface for Remote Operation and Driving Peripheral Devices (Fixtures,
  Feeders, etc.)
• Optional PC Card for Additional Test Program Storage

• Dimensions & Weight
• Portable Enclosure
• 11.8 x 9.1 x 5.9 inches (W x D x H)
• 7.7 lbs without Test Point Cards